What is the Purpose of Using Binding Wires During Construction?

Are you planning to get your house constructed or renovated? Then, you need to know about binding wires. These are used extensively in the construction sector for tying applications. The rebars get tied at the joints to keep the structure intact using binding wires. Binding wires also get referred to as annealed wires. They are subject to the process of annealing to make them flexible and soft for tying. The annealed wire construction is done using wires of different diameters ranging from 0.61 mm to 1.22 mm. To use binding wires during construction, it requires these wires to be flexible and robust. They should be flexible enough to tie and strong enough to hold a joint.

Why Steel is used in Binding Wires?

Binding wires can keep the reinforcement in place. In the absence of the construction binding wire, the reinforcement can move leading to an increase in spacing between reinforcement in a particular section and decrease in another section. This will affect the strength of the structure and can lead to construction failure.

Purpose of Binding Wires

There are six different ways of tying binding wire. You can get an idea with the below image.

If you are looking for reliable and quality construction binding wire for your home, then trust TATA Wiron Binding Wires. The TATA Steel Global Wires Division is one of the largest manufacturers of wires in India. One of their notable products is the TATA Wiron Binding Wires. These wires are available in different diameters ranging from 0.61 mm to 1.22 mm.

To get more insight into binding wires and for all the information, connect with the experts here. Getting the best quality wires for home and office construction is only a click away.